SOLDNew CM 8.5' x 84 ALSK Flatbed Truck Bed

  • Stock #: 357715
  • Location: Sycamore
  • Status: Sold
  • Condition: New
  • Manufacturer: CM
  • Model: ALSK
  • Construction Material: Steel fram
  • Length: 8.5'
  • Width: 84.00"
  • Cab to Axle: 56"
  • Frame Rail Width: 38"
  • Manufacturer Part #: ALSK-02845638
  • Headache Rack Height: 45.5
  • Weight: 710 LBS
  • Warranty: Mfg Limited Warranty. Exclusions may apply.


New CM ALSK Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-02845638. Weighs approx 710 lbs. Serial # MV00357715.

Will this bed fit my truck?  This is the standard recommendation for a:

    This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: 

    - SINGLE Rear Wheel

    - LONG bed (8' long)

    - 42 inch Frame Rail width

Please measure your truck to compare & verify. Exclusions & limitations may apply.


  • Aluminum full length skirt w rolled fenders & ATP trim

  • Steel frame construction

  • Qty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)

  • Extruded aluminum deck

  • Integrated aluminum headache rack

  • Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)

  • Sealed wiring harness

  • 7 pin plug

  • LED lights

  • Aluminum rubrail with stake pockets

  • Tapered corners for max turning radius

  • Powdercoat steel chassis.


  • Length: Measurement from the back of the cab to end of frame

  • Width:  Measurement from outside of rear tire to outside of rear tire

  • CA: Measurement from the back of the cab to center of rear axle

  • Rails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)

  • HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.


  • Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.

  • The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.

  • For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.

  • Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)

Located in Sycamore, IL 60178.

Sorry, payment with credit cards are not allowed for 'Cash Price' specials.

For additional information and to see our HUGE selection of inventory, go to or call us at 815-899-4340.

Last Updated: 2024-01-06 15:57:19

Have more questions? 

Not sure which bed will fit your truck?

Interested in having us install the bed?

Call Us For More Details! 815-899-4340

Other Important Information:

- There are differences between all the manufacturers/brands - such as the specifications, models, terminology, materials, etc - which ultimately shapes the way the product is built and described. Descriptions will vary with each brand.

- Rondo Entereprises is a dealer and not a manufacturer.  We do not make the products that we sell.  Any applicable warranty is from the manafacturer.  The warranty coverage and terms are set by the manufacturer.

- You can't take the product home until it's paid in full so please come prepared with your driver's license and payment.

- Sorry, we do not accept out of state checks!

- A credit card(Visa, etc) is NOT the same as Cash($100 bills).

- For all credit & debit card transactions, the physical card must be present. Due to fraud, we will NOT manually enter or take a credit card over the phone for transactions over $500. 

- For large purchases with Pin based Debit cards, please verify with your bank before coming about spending limits or caps. The Debit card must to be physically present and your 4-digit pin is required. 

- A current driver's license is required for all financing applications.  Sheffield is available ONLY to IL residents (sorry, you can't use Sheffield if you live out of state due to the titling requirements). Limitations and restrictions may apply.

If you have any questions, please call us at 815-899-4340.

Rondo Request For Quote/Information

Please fill out the form below and one of our sales associates will contact you regarding this item.

  • Please Add Me To The Rondo Newsletter.
New CM 8.5 x 84 ALSK Flatbed Truck Bed

Payment Methods.png

*Ask about our 3% Cash discount.  Rather than paying processing fees to the credit card companies, we offer a 3% discount to our customers for not using credit cards or financing payment methods.

All prices advertised do not include sales tax and/or fees, mounting hardware, accessories, etc and labor to install.  Installation requires tools, time, and knowledge.  We have all of these plus experience!  Contact us for an installation estimate.
Payment types accepted:
  • Cash*
  • Certified funds* (wire transfer or cashier's check)
  • Checks* (NO out of state checks)
  • Pin based Debit cards* -- please verify with your bank beforehand about any spending limits or caps. The card needs to be physically present and you will need your 4-digit pin. 
  • All major credit cards (Visa, Mastercard, Amex, Discover, Paypal)
  • Financing is available - please click here for more information (limitations and restrictions may apply). A valid Driver's License & social security number required to apply.

Please Note: For all credit & debit card transactions, the physical card must be present. Due to fraud, we will NOT manually enter or take a credit card over the phone for transactions over $500.

Rondo Enterprises, Inc
Truck & Trailer Sales



1115 E State St (Route 64)
Sycamore, IL 60178


Store Hours

Monday - Friday:

8:00 am to 5:00 pm


9:00 am to 1:00 pm - New Hours!

(Service is closed on Sat)



Also closed for major holidays.

Take a Tour